|PWM LED light dimmer circuit|
PWM ( Pulse Width Modulation) is a modulation technique in which the width of the pulse is varied based on the modulating signal. This possess wide variety of applications including motor speed control which is the most famous application of the PWM. This PWM led dimmer circuit uses IC 555 to generate PWM which is employed to dim the LED’s connected to the IC.
WORKING OF PWM LED DIMMER CIRCUIT:
555 timer IC a widely used one was used to generate the PWM signal here. Here the IC was wired as an Astable Multivibrator which gives square wave pulses as output in pin 3. The output frequency of the the Multivibrator was governed by the values R2, RV1 and C2. Here change in resistance value of the RV1 alters the width of the output pulse thereby generating a PWM signal in the pin 3.
The generated PWM signal is fed into the base of the transistor since the 555 cannot source sufficient current for the working of LED’s. In the above circuit we have used white LED’s which consume 30mA and forward voltage of 3.5v. The above dimmer circuit can be used for two purposes here one is to produce dimming effect in the LED’s whereas another one is to save power consumed by the LED’s.
Using PWM signal we can reduce the on time of the LED in the above circuit which makes the circuit to consume less power. Around 70% – 80% PWM duty cycle it will switch as fast so that the human eye cannot see the flickering in the LED’s. The duty cycle of the PWM signal can be adjusted by varying resistance in RV1 and should be altered till no flickering is observed through our eyes. So through this way we can obtain desired luminescence with less power consumption.
Dimming of LED’s works the same way as above and should be done manually. You should vary the Resistance through the RV1 and this create an interesting dimming effect in the LED’s because of the varied on and off time of the PWM signal.
Latest posts by Frank Donald (see all)
- Creating Arduino web server and controlling things via WiFi – Tutorial - December 6, 2017
- Interfacing RGB LED with Arduino - November 1, 2017
- Solar powered + Remote operated Plant watering system - October 13, 2017